@FLYBOY442 . I have LB v2.0.03 RC3 working fine with UGS v2.1.9 and v2.1.12. See the setup here- V2.0.02-RC1 GRBL continuous jogging has issues - #28 by bLouChip
The notes to add are: I always use LB with the full working area (bed) defined as my G54 work coordinate system, so WCS X0Y0 is max left front corner position, while machine coord X0Y0 is back right corner (defined by grbl after homing). I use a LB macro to define max left front (LF) 000.
Conversely, while using UGS, I routinely define WCS G54 X0Y0 anywhere on the bed, where ever I drop my work piece for routing or plasma process, or I use max LF 000 also when using LB camera while doing 2D CAD for routing or plasma process. This is the net difference and ‘config’ change between LB vs. UGS running the table. But I consider this to be a very loosely coupled ‘config’ change, as it does NOT involve changing any $$ true config settings.
re. UGS versions, I’ve learned not to install the latest UGS until it bakes in public use for awhile, so I suspect this setup will continue to work with UGS well beyond v2.1.12.
I hope this helps you.