Xtool S1 with 2w1064 IR head, Lightburn 1.7.4 wont process and offsets need to be changed for 40 w

[JoeSpanier]

something in the machine is sending that cancel alarm. I don’t have the IR head so I am not sure what it might be.

It looks like you are running the GRBL device file that xTool sends. Have you tried running with the new xTool protocol?

Setting up xTool S1 with new xTool device type in LB 1.7 Beta

This device type does not support the xTool F1 or P2. It does not support ANY network device at this time You will need the beta version linked here: https://drive.google.com/drive/folders/1NlXdR93xibmEnw625vCXf79cPITThy5u In the new 1.7 Beta we are adding native support for xTool Devices that use serial communication like the D1, D1 Pro, and S1. This bypasses their GRBL compatibility layer and has resolved some of the issues we have seen with these machines like making triangles when rectang…