3018 Pro Maxx - engraving halts at different times

[paulcw (Paul WIlliams)]

Ortur laser disconnect

Had the same problem random disconnects, drove me crazy tried all sorts, in the end I found it was the Freezer, on same mains ring, every time it turned on or off it browned the board out, put it on a different mains ring and all is good, I did until I solved the problem use a inline home made UPS , but i just used an inverter off a car battery on a permanent digital charger. to run the machine, can buy a pre made one on amazon from about £50 upwards depending on the power demand, as it being s…