How dou You connect Lightburn to DI via wifi?

[berainlb (PY)]

IP connections were introduced for GRBL devices a few versions ago. There has been some success in connecting a MKS DCL32 device but I’m not aware of anyone successfully burning with this setup.

If there was any chance of this working with xTool D1 it would need to working in a Telnet server like model.

You can read-up on progress of getting WiFi connected through these Topics:

Mks DLC32 ESP32 FW Grbl WIFI connectivity Success

Have any of you tried using the new IP option for GRBL devices that was introduced in 1.1.00? I believe it’s expecting a telnet like service on the receiving end. Curious as to how this is working but haven’t had a chance to try this myself.

LightBurn WIFI MKS DLC32 how to set up port 8080

hope this helps someone LB recently added GRBL extra connection : ethernet/TCP there is no settings that would allow the port changes. LB has used the default TELNET’s port23 as the start point. in order to change the port for MKS DLC32 to be able to connect via WIFI: we would need to export the preference and modify the default port 23 to 8080 and LB it will be able to connect without issues. [image]